Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Stanton, CA | Ashbury Contractors
We install, reface, and repair Ameristar cabinetry and vanity lines across Stanton, including Garden Grove Ameristar service, and we’re one of the few contractors in this city who stocks OEM-compatible Ameristar hardware locally for same-week turnaround. The thing that sets our Ameristar work apart here is simple: Stanton is fully built out, roughly 37,000 people in 3.4 square miles, so nearly every install we do is a redevelopment inside an existing 1950s-60s tract house with out-of-square walls and tight lot access. We plan for that before we quote. Call (833) 467-4091 to schedule a free estimate.
Why Stanton Residents Choose Us for Ameristar Service
We’ve pulled Ameristar boxes out of Stanton and Cypress Ameristar service kitchens where the sink base had swollen to the point the doors would not close, and we’ve installed new Ameristar runs that fit flush against wall framing that was never square to begin with. That experience matters more than a dealership sign. We’re an independent contractor, which means we work for you, not a manufacturer’s sales quota. We specify the product before we quote the price, and we recommend the Ameristar line when it suits the home and budget, and a different line when it doesn’t.
Noel Quintero, who runs Ashbury Contractors, grew up off Red Hill Avenue in Tustin and has spent more than two decades working residential and light commercial builds across Orange County. He’s the guy neighbors call when a previous contractor’s work starts showing cracks, literally, and he brings that same diagnostic eye to every Ameristar cabinet and countertop install we take on in Stanton.
Styles & brands we work with







Common Ameristar Construction Problems We Solve in Stanton
We see the same Ameristar failure modes repeat across Stanton’s post-war housing stock. Here’s what we fix most often:
- Swollen sink bases and toe kicks. Older Stanton kitchens were built before range hoods and ventilation became standard, and decades of trapped moisture wick into Ameristar’s particleboard and MDF box construction. The sink base swells first, then the toe kick starts to delaminate.
- Drawer glides loosening on out-of-square framing. Ameristar stock boxes are square. A 1950s stucco ranch wall usually is not. When installers shim poorly, the glide screws work loose within a year and drawers start binding.
- Thermofoil delamination on west-facing cabinets. We see this on Stanton homes with unshaded west or south kitchen windows during the Santa Ana season. Hot, dry wind hits the door fronts all afternoon, and the thermofoil finish starts peeling at the corners.
- Twisted cabinet runs on slab and garage-conversion floors. Many Stanton garage conversions have floors that slope toward an old drain, and some slabs wick moisture. Cabinets set directly on those floors rack within months, leaving doors that will not close flush.
- Failed drawer glides and hinges on high-use stock boxes. Ameristar’s original hardware is fine for light use, but in a busy Stanton kitchen the rollers and hinges wear quickly. We replace them with aftermarket glides and hinges that outlast the originals.
Ameristar Service in Stanton: What Local Conditions Mean for Your Equipment
Stanton packs about 37,000 people into roughly 3.4 square miles, and the city is fully built out. There are no new subdivisions coming, which means every Ameristar kitchen or vanity install we do is a redevelopment inside an existing home, almost always a 1950s-60s tract house on a narrow lot. Those homes have out-of-square wall framing, slab floors that have moved over seven decades, and often no side-yard access. For Ameristar owners, that translates into a specific set of conditions: cabinet runs that need to be shimmed and re-squared before countertops go on, staging and delivery planned around alleys and driveways because there’s nowhere to put a dumpster, and moisture management on slab floors that were never designed for modern cabinet runs. A crew that doesn’t account for the tight parcel lines and zero-lot-line setbacks in Stanton’s mid-century tracts hits a wall on day one. We plan the whole job around those constraints before we submit a permit drawing.
On a Midway City Ameristar service remodel off a narrow lot near Beach Boulevard, our crew pulled a tired Ameristar stock cabinet run out of a 1950s stucco ranch after the sink base had swollen and the doors had delaminated along a west-facing wall. Because the home had no side-yard access, we staged the new boxes and quartz slab in the alley and hand-carried them in, then shimmed and re-squared each Ameristar box to the old wall framing before setting countertops. The homeowner got a tight, level run that finally closed flush. No twisted doors, no moisture-swollen toe kick.
Ameristar Models & Products We Service in Stanton
We install and service the Ameristar by Masco cabinetry lines, including stock and ready-to-assemble kitchen and vanity cabinets, the semi-custom shaker and raised-panel door styles sold through dealer channels, and the Ameristar vanity and quartz-top bundles used in bathroom refreshes across Stanton. When a finish match matters, we source Ameristar OEM doors, drawer fronts, and hardware. When a glide or hinge has failed and the original was never good enough, we install quality aftermarket hardware that holds up longer. On a single sagging cabinet we repair. When multiple boxes show swelling or delamination, we tell owners straight whether refacing or a full cabinet swap is the honest call. The goal is a repair that lasts, not a patch that returns in a year.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Stanton
Here’s what our Ameristar cabinet and countertop work typically costs in Stanton:
| Service | Typical Range |
|---|---|
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Your actual cost depends on how many cabinet boxes we’re installing or refacing, whether the countertop is laminate or quartz, and how much re-squaring the existing Stanton wall framing requires. A free estimate includes a written line-item quote, and we walk the site with you before we finalize numbers. Call (833) 467-4091 to schedule yours.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well, and we also provide General Contractor – Stanton services. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Stanton
Yes, when the cabinet boxes are structurally sound we can reface them with new Ameristar doors and drawer fronts, and we’ll replace hardware with aftermarket glides and hinges that outlast the originals. If the sink base or toe kick has swollen from moisture, refacing won’t fix the problem and we’ll tell you that before you spend the money. Call (833) 467-4091 for an honest assessment, free.
Usually it’s a combination of both. The cabinet was square when it left the factory, but the 1950s wall framing in many Stanton homes is not, and slab floors move over decades. The glides loosen, the boxes rack, and the doors bind. We diagnose which is causing the problem, then re-shim and re-square the boxes before resetting hardware. Call (833) 467-4091 and we’ll take a look.
We plan staging and delivery around alley access and driveway realities before the job starts. On tight Stanton parcels, that usually means staging materials in the alley, protecting the neighbors’ access, and hand-carrying boxes and slabs to the kitchen. It takes longer and costs a little more, but it prevents the day-one wall every crew hits when they assume they can pull a truck around the side.
Yes. Thermofoil and some laminate finishes on Ameristar doors and drawer fronts delaminate faster on Stanton homes with unshaded west or south kitchen windows during the hot, dry Santa Ana months. We recommend finish options that hold up better to direct afternoon sun, and we can replace delaminated doors with OEM Ameristar fronts when you want to keep the existing look. Call (833) 467-4091 for a quote.
Yes, we do the full run. We install or reface the Ameristar cabinet boxes, then set the countertop, then finish with the backsplash, under one contract. You’re not coordinating a cabinet installer, a countertop fabricator, and a tile setter. One crew, one schedule, one point of contact. Call (833) 467-4091 to talk through your kitchen.
Service Areas Near Stanton
Our Ameristar service area covers Stanton and the surrounding Orange County cities. We regularly work in Stanton, Tustin, North Tustin, Santa Ana, Orange, Villa Park, and Irvine. If you’re on the edge of Stanton’s 90680 ZIP and need Ameristar cabinet or countertop work, call us and we’ll confirm coverage. We also handle Ameristar service in Westminster and Ameristar service in Lake Forest for clients in those neighboring markets.
Book Your Ameristar Service in Stanton Today
If your Ameristar cabinets are swelling, your drawers are binding, or your doors won’t close flush, call (833) 467-4091. We’ll walk the site, tell you whether repair or replacement is the honest call, and give you a free written estimate. We’re Ashbury Contractors, an independent Ameristar service provider serving Stanton, and we’ve been Ameristar sales & service specialists long enough to know exactly how these boxes hold up in tight, older kitchens. Build it right the first time or you’ll be explaining yourself twice.
Written by Noel Quintero, Owner at Ashbury Contractors, serving Stanton, CA.