Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Home Remodeling Across Cypress
A whole-home remodel in Cypress runs $45,000 to $130,000 for a full-scope job, while a kitchen remodel lands between $14,000 and $45,000. Those are the ranges we quote most often, and they’re based on the reality of working on 1950s – 1970s tract homes in the 90630 ZIP code. If you’re planning a remodel here, the single biggest factor in what you’ll pay is whether the spec accounts for salt air: marine fog pushes inland from the coast and settles over Cypress just enough that stainless steel fasteners, sealed joints, and marine-grade exterior finishes determine whether your investment lasts 10 years or 25.
We know Cypress because we’ve framed, roofed, and finished houses from Lincoln East to Sorrento. Call (833) 467-4091 and we’ll walk your property, talk materials, and hand you a written line-item quote before any work begins.
Why Ashbury Contractors Is Cypress’s Preferred Home Remodeling Company
Cypress is not a city where you want a contractor learning on the job. Nearly every project here is infill or remodel work on mid-century tract housing, which means the houses were built under older codes and the city now applies one of the stricter plan-check and inspection regimes in northwest Orange County. We’ve completed whole-house remodels where the difference between a smooth inspection and a rejected plan came down to documenting every fastener spec before framing started.
Our Home Remodeling team works as one accountable contractor across interior and exterior scope. When we handle a Cypress project, we’re the same crew specifying the Cambria countertops, the GAF roofing system, and the Therma-Tru entry door. The homeowner never juggles three separate crews and never gets the finger-pointing that happens when subs are left to coordinate among themselves.
Noel Quintero leads our Cypress work personally on the scope and materials side. He’s particular about what gets written into a contract, because he’s the one who has to stand behind it at final inspection. When you call, you’re talking to someone who has walked the setbacks on Cypress’s 60-foot lots and knows why a second-story addition on an original 3-bed/2-bath plan gets scrutinized by design review. That local knowledge is the reason homeowners in the Tanglewood and Greenbrook tracts keep our number.
Styles & brands we work with







Whole House Remodel in Cypress
A Whole House Remodel in Cypress means taking a 1,400 to 1,800-square-foot tract home from the Johnson and Eisenhower eras and reworking it room by room under one contract. In this market, that typically runs $45,000 to $130,000 depending on whether you’re updating finishes, opening load-bearing walls, or adding square footage. The Cypress-specific wrinkle is that many original homes here still carry their 1960s single-pane aluminum windows, which have corroded at the fasteners from decades of salt-laden fog. Any whole-house job we scope here starts with the envelope: windows, doors, roofing fasteners, and exterior trim. If those are not specified for coastal exposure, the interior work is a waste of money.
Full Interior Reconfiguration
We opened three walls in a Lincoln East ranch last year to turn a dated galley kitchen and enclosed den into one continuous living space. The job required an engineered beam, new plumbing runs, and a full electrical re-feed, and the plan check took three rounds because of Cyprus’s load-path documentation requirements. That’s normal here. We price it in advance so the homeowner isn’t surprised by the review process.
Envelope-First Remodel Sequencing
When floors, cabinets, and tile are involved, we sequence the exterior work first: roof, windows, and doors get done before finish carpentry begins. In Cypress, that ordering matters because the salt air doesn’t stop when the drywall goes up. It means installation teams are never re-exposing finished walls or re-trimming a new window because a leak appeared in the first winter storm.
Luxury Home Remodeling in Cypress
Luxury Home Remodeling in Cypress is less about adding square footage and more about specifying materials that would not have existed when the house was built. We’re talking Cambria or Caesarstone quartz in the kitchen, a Kohler or Toto wet room in the primary bath, and an impact-rated ES Windows package that replaces those corroded aluminum originals. Expect $90,000 to $130,000 for a full luxury whole-house scope, though a single premium kitchen and bath pair can be done in the $45,000 to $65,000 range with the right product tier discipline.
Manufacturer-Grade Finishes, Not Upgrade Lists
Our approach to luxury work is that the brand should be named in the contract before the price is quoted. You know you’re getting a specific Cambria slab, a specific Grohe fixture package, and a specific Therma-Tru door with stainless hardware. That’s “Built to the standard of the brand” in practice, and it eliminates the change-order creep that happens when “comparable” substitutions show up unannounced.
Whole-Property Luxury Scope
Some Cypress homeowners want the luxury effort to extend past the walls. We’ll tie a paving renovation using Belgard or Unilock pavers into a new exterior fence with hot-dip galvanized posts, and we’ll seal every joint for salt-air exposure. The result reads as one property-wide transformation, not a series of separate jobs that happened to overlap.
Trusted Brands We Service in Cypress
We stock and service ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru for Cypress homeowners, which means you’re not waiting on a supply-house trip from Anaheim when a window or door arrives short. For vinyl-framed coastal exposure, we lean on ES Windows and ECO Window Systems because their seals and hardware stand up to the salt fog. For entry doors, Therma-Tru’s composite frames resist the bottom-rail rot that eats standard wood doors in this climate. We keep common replacement parts local so a trim or hardware issue doesn’t stall your inspection.
See the difference
Before
After
Before
After
Before
AfterCommon Home Remodeling Problems We See in Cypress Homes
- Electro-galvanized fasteners failing by rust-jacking. We see roofing nails and fence hardware that look fine at year two and are swollen and splitting at year six. The fix is hot-dip galvanized or stainless steel, specified in the contract, not left to installer discretion.
- Bottom-up rot on standard wood fence posts and railings. Cypress’s salt fog and seasonal moisture wick up untreated pine and destroy it within five to seven years. We specify treated or steel-reinforced posts with sealed end-grain before they go into the ground.
- Unsealed paver joints and exterior trim letting salt air drive efflorescence and paint failure. A patio laid with standard joint sand will show white mineral staining and spalling within a few seasons. We seal joints and use marine-grade finishes on all exterior wood.
- Corroded 1960s aluminum window frames causing drafts and water intrusion. The original windows in many Cypress tracts were aluminum with steel fasteners that have been corroding for 50 years. We replace them with impact-rated vinyl frames and stainless hardware before interior work starts.
We recently completed a whole-house remodel in the Lincoln East tract, off Lincoln Ave near Walker St. The original aluminum window frames had corroded at the fasteners, causing persistent drafts and water intrusion. Our crew replaced them with impact-rated vinyl frames, stainless steel screws, and marine-grade sealant. The homeowners immediately noticed reduced street noise and no more condensation. The inspection sign-off passed on the first try because we documented every fastener spec in the scope of work.
Pricing for Home Remodeling in Cypress, CA
The prices below are what Cypress homeowners actually pay, based on our jobs in 90630. The coastal-spec version of a project, stainless fasteners, marine-grade sealant, impact-rated windows, runs 15% to 25% higher than the same scope specified with inland materials. That gap buys you 20 to 25 years of service life instead of 10. The cheap spec costs more within a decade because you’re paying for premature replacement.
| Project | Cypress Range |
|---|---|
| Whole House Remodel | $45,000 – $130,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
We specify the product before we quote the price. That means your estimate names the actual materials, Cambria slab, GAF shingle, Therma-Tru door, not a vague line item that leaves the door open for substitutions. Call (833) 467-4091 for a written line-item quote. Estimates are free, and the numbers above are what we’ll anchor your scope to.
We Also Serve Cities Near Cypress
Ashbury Contractors serves Cypress and the surrounding Orange County communities. The same coastal-spec discipline applies in La Palma, Stanton, Buena Park, and Garden Grove, which sit in the same salt-air band as Cypress. If you’re in a neighboring city and want a contractor who understands the envelope requirements of this climate, call us. We treat every project as a full-scope Home Remodeling in Cypress job, from the foundation to the fence line.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Home Remodeling in Cypress
Cypress sits on the coastal-inland edge where marine fog pushes salt-laden air inland just far enough that zinc-plated and electro-galvanized fasteners fail by rust-jacking within five to seven years. Stainless steel and hot-dip galvanized hardware resists that corrosion and extends a roof’s service life from roughly 10 years to 25. We spec them on every exterior job in 90630. Call (833) 467-4091 to have us review your existing hardware.
A coastal-spec remodel in Cypress runs about 15% to 25% more than the same scope specified for an inland city. The difference is in stainless fasteners, marine-grade sealants, impact-rated windows, and sealed paver joints. The inland-spec version costs less up front but often fails within a decade, forcing premature replacement that doubles the lifetime cost. Call for a line-item quote that names the actual materials.
The contract should name every brand and fastener spec before the price appears – no “comparable” substitutions, no vague line items. In Cypress, specifically, the scope of work should document fastener materials, sealant types, and joint sealing for exterior work, because those are the details that either pass inspection or fail it. We write contracts that way as standard practice. Call (833) 467-4091 and we’ll show you what a real scope document looks like.
Yes. Cypress applies a stricter municipal permitting and inspection regime than most neighboring Orange County cities, especially for structural changes, second-story additions, and any work on 1950s – 1970s tract homes that were built under older codes. Skipping the permit means the work won’t be recognized at resale, and unpermitted structural changes can stall a sale entirely. We pull every permit and pass every inspection before final sign-off.
Second-story additions in Cypress routinely hit design-review and setback scrutiny that neighboring cities don’t impose, particularly on the original 3-bed/2-bath lots. The review process looks at massing, roof form, and window placement against the tract’s original architectural character. Knowing the plan-check quirks in advance, what triggers review, what gets rejected, is as important as the framing itself. Call (833) 467-4091 and we’ll walk you through what your specific addition will face.
Written by Noel Quintero, Owner at Ashbury Contractors, serving Cypress and northwest Orange County since our first tract remodel in the 90630 ZIP.