Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Irvine, CA | Ashbury Contractors
We’re an independent contractor that builds, finishes, and repairs Dvele panelized homes and ADUs across Irvine. Dvele handles the factory shell; we handle everything from city permits and village design-review approvals to crane-set coordination, interior finishes, and the exterior detailing Irvine’s HOAs actually enforce. If you own a Dvele home in Irvine or are planning one, call (833) 467-4091 for a straight read on what the project needs before you spend a dollar.
Why Irvine Residents Choose Us for Dvele Service
Noel Quintero grew up off Red Hill Avenue in Tustin and spent two decades working residential and light commercial builds across Orange County before founding Ashbury Contractors, now offering Tustin Dvele service. He teaches our crews to read Dvele’s structural panel drawings the way a framer reads a set of plans: joint by joint, chase by chase. That matters in Irvine, where a Dvele shell isn’t the finish line. It’s the starting point for a project that still has to clear Irvine’s building division plus a village architectural review.
We’re not a Dvele dealer and we don’t claim factory authorization. What we bring is years of taking factory panels from crane-set to move-in, then standing behind the work when Irvine’s heat and Santa Ana winds test the seals. Our Dvele sales & service work spans the full build-out, but Irvine owners call us most for ADUs, additions, and the roof and stucco issues that show up a few years after the shell goes up. One contractor handles the Dvele scope and the site work, so you’re not juggling a factory rep, a GC, and an HOA compliance headache on your own.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Irvine
- Factory panel joints and chase seams leaking dust and air. Irvine’s hot dry summers and Santa Ana wind events push fine dust into any penetration that wasn’t field-sealed properly. We pull the interior trim, seal the seams with Dvele-specified products, and re-test before closing walls back up.
- Stucco-and-tile transitions cracking where the Dvele shell meets site-built additions. This is the most common call we get on foothill and canyon-edge lots, where thermal movement between the factory panels and a stick-framed addition shows up as hairline cracks within a season. We cut, re-lathe, and re-flash the transition so it moves without failing.
- Low-slope roof panel terminations showing uplift and sealant fatigue. Dvele ships low-slope roof assemblies that work fine until a few Santa Ana cycles work the flashing at the panel edges. We inspect terminations, re-torque connectors, and replace sealant before a small lift becomes a water-intrusion problem.
- Mechanical and electrical chases that fight the floor plan. Irvine’s tract-home footprints are tight, and when owners reconfigure an interior, the factory chases don’t always line up with where the new kitchen or bath actually needs to run. We re-route through the panels carefully, keeping the structural integrity intact while getting the layout to work.
- Design-review and permit gaps that stall a Dvele project before it starts. Irvine’s dual approval process catches first-time Dvele buyers off guard. We pull the city permit and shepherd the village architectural review, because a set of panels sitting in a warehouse while the HOA debates a roofline is money burning by the week.
Dvele Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine is a master-planned city built almost entirely by the Irvine Company since the 1960s, and that shapes every Dvele project here in a way it doesn’t in Tustin or Dvele repair in Santa Ana. The villages (Woodbridge, Northwood, Westpark, the Great Park neighborhoods) all run architectural review boards with the authority to reject a roofline, a paint shade, or a panel detail before the city even looks at your permit. So a Dvele ADU in Irvine isn’t just a factory shell on a slab. It’s two approval tracks running at once: Irvine’s own building division for code, and the village design-review committee for everything from exterior color to window trim. We’ve worked enough of these to know which villages move fast and which ones will ask for re-submittals. That’s the real local knowledge, and it’s the difference between setting panels in six weeks and watching a project stall for four months over a fascia detail.
Dvele Models & Products We Service in Irvine
We work on the full Dvele line as an independent contractor: the Modular ADU series, prefab single-family home packages, panelized wall and floor systems built to California code, and the net-zero-ready shells with integrated mechanical chases. For anything structural, we source Dvele-specified fasteners, sealants, and connectors from the factory or their approved suppliers. For non-structural finish work we use quality aftermarket materials, and we’ll tell you which is which before we quote. We keep the common Dvele-specified sealants and panel connectors in stock for Irvine jobs, which cuts turnaround when a roof termination needs resealing or a chase needs re-routing.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Irvine
Dvele-specific work in Irvine spans a wide range because the project scope does. A roof-panel reseal is a few hundred dollars. A full ADU build-out on a Dvele shell is a six-figure project. Here’s where our current Irvine pricing lands:
| Service | Typical Irvine Range |
|---|---|
| ADU Construction (on Dvele shell) | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
| Tile Roof Repair | $600 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
What drives cost: whether the shell is already set or still needs site prep and crane work, how much mechanical chases need re-routing, and which village design-review conditions apply. A free estimate from us includes a site walk, a read on your Dvele panel condition, and a written line-item quote. Call (833) 467-4091 to schedule one.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help, including Dvele service in Aliso Viejo.
FAQs – Dvele Construction in Irvine
Yes. Irvine’s village HOAs require architectural design review for an ADU or addition on a Dvele shell, and you also need a city permit from Irvine’s building division. We handle both tracks so the panels don’t arrive before the approvals clear. Call (833) 467-4091 and we’ll walk you through the specific village’s process.
We can, but it depends on the panel system’s load path and what the village design-review board will allow. Dvele’s panelized walls are engineered, so we read the structural drawings before proposing any vertical expansion. Irvine’s tight tract setbacks also limit footprint growth, which is why second-story additions are usually the smarter play here.
We inspect the roof panel terminations and flashing first, then re-torque the panel connectors and reseal with Dvele-specified products. If the panel itself is compromised by water intrusion, we tell you plainly and quote a replacement. Small reseals usually run $400 to $1,800 in Irvine; call (833) 467-4091 for an exact read.
No, and that’s part of our job. We sequence any exterior work to match the village’s approved palette and material list before we touch a panel. The Dvele shell is just the starting point; we finish exteriors to the standard Irvine’s villages actually enforce, not to a generic spec.
Dvele factory parts for anything structural, every time. Fasteners, connectors, sealants, and panel components come from Dvele or their approved suppliers. We use quality aftermarket materials only for non-structural finish work, and we tell you which is which before we quote.
Service Areas Near Irvine
We run Dvele construction and service across Irvine service area and the surrounding cities. For projects just outside Irvine, we also cover Dvele service in Garden Grove and Dvele service in Fountain Valley. Tustin, North Tustin, Santa Ana, Orange, and Villa Park are all regular stops for our crews.
Book Your Dvele Service in Irvine Today
If you own a Dvele home or ADU in Irvine, or you’re planning one, call us before you commit to a scope. Noel’s rule applies: build it right the first time or you’ll be explaining yourself twice. Reach us at (833) 467-4091 for a free estimate.
Written by Noel Quintero, Owner at Ashbury Contractors, serving Irvine, Dvele in North Tustin, and Orange County.