Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Irvine, CA | Ashbury Contractors
We provide independent CGI cabinet sales, installation, repair, and refacing across Irvine. The short version: we know which CGI cabinet lines actually shipped into Woodbridge, Northwood, and Westpark kitchens, how they age in this semi-arid climate, and what it takes to repair or replace them without fighting village architectural review. We’re not manufacturer-authorized, and we don’t pretend to be. Call (833) 467-4091 for a free estimate.
Why Irvine Residents Choose Us for CGI Service
Most Irvine kitchens we open up were built by the Irvine Company inside a village HOA, so the cabinetry tends to be tract-home spec: CGI RTA Shaker boxes, thermofoil door fronts, melamine shelves. We’ve pulled apart enough of them to know exactly where they fail and how to fix it right. Noel Quintero grew up off Red Hill Avenue in Tustin and spent his teenage years watching older ranch homes get undercut by shortcuts that never held. That’s why we specify the product before we quote the price, and why we tell you plainly when a swollen cabinet box is past saving. As an independent contractor, we diagnose and repair CGI hardware and millwork on its own merits. No authorization from CGI is implied.
Styles & brands we work with
Common CGI Construction Problems We Solve in Irvine
- Thermofoil door skins blistering and peeling. CGI thermofoil slab and raised-panel doors take a beating near south- and west-facing kitchen windows in Irvine. The reflected heat from stucco walls and hardscape bakes the foil until it lifts at the edges and curls. We strip the failed doors, reskin or replace the fronts, and swap in fronts that will hold up under that exposure.
- Particleboard cabinet boxes swelling at sink bases and dishwasher openings. Slow supply-line drips and disposal leaks go unnoticed for months, and the particleboard in CGI RTA boxes soaks it up and crumbles. In tightly clustered tract kitchens, the leak is often behind the cabinet before anyone sees water. We cut out the failed box, fit a plywood replacement, and reset the run so the surviving cabinets still line up.
- Stripped hinge-screw holes in CGI door frames. Particleboard loses its bite after years of daily use. Hinges sag, doors hang crooked, and re-tightening the same screws just makes it worse. We bore and plug the holes, then remount with proper hardware so the doors close square again.
- Melamine and foil finishes chalking or yellowing. Uppers that sit close to cooktop heat and strong Irvine daylight discolor faster than most homeowners expect. The finish goes chalky, then starts to lift. We resurface or replace those uppers and adjust the specification so the replacement material holds up under the same conditions.
- Hinge and drawer slide failures on high-use cabinets. Irvine kitchens see heavy daily use, and the original CGI hardware gives out first. We fit quality aftermarket soft-close hinges and undermount slides when OEM parts are discontinued, so the boxes stay and the motion improves.
CGI Service in Irvine: What Local Conditions Mean for Your Equipment
Almost every Irvine kitchen we open up sits behind a village HOA design-review process, and that changes the repair math. A cabinet refacing or countertop swap in Woodbridge or Westpark is not a weekend job you can start on a whim. You need architectural approval for anything that changes the visible kitchen finish, and the city’s building division wants its permits pulled before demo starts. We handle that approval flow as part of our scope, because a stalled permit costs more than a countertop ever will. In one Woodbridge townhome off Yale Loop, our crew pulled a CGI thermofoil door run where the foil had peeled along the dishwasher edge and the particleboard box had swollen from a slow supply-line drip. We replaced the sink-base cabinet with a plywood box, matched the surviving CGI Shaker fronts, and reset the run under a new quartz top. We pulled the HOA architectural approval before the first cabinet came out, so nothing stalled mid-job. Build it right the first time or you’ll be explaining yourself twice.
CGI Models & Products We Service in Irvine
We work on the CGI lines that actually landed in Irvine tract homes: the Ready-to-Assemble Shaker-style cabinet line, thermofoil slab and raised-panel door fronts, melamine-faced RTA boxes with particleboard cores, and the plywood-box Shaker collections marketed to remodelers. Where the line is still supported, we match genuine CGI door fronts, hinges, drawer boxes, and shelf clips so existing cabinetry can be extended or repaired instead of replaced. When OEM parts are discontinued, we fit quality aftermarket soft-close hinges and undermount slides. We stock common CGI hardware locally for faster Irvine turnaround, so you’re not waiting on a parts shipment from out of state. Our CGI sales & service work spans full kitchen remodels, cabinet installation and refacing, and quartz or granite countertops.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Irvine
Pricing depends on what you’re repairing or replacing, the material we specify, and how much of the run has to come out. Here are the ranges we quote most often in Irvine kitchens:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Backsplash Installation | $800 – $2,500 |
Your free estimate includes a written line-item quote and a straight answer on whether your CGI boxes are worth saving or better replaced. Call (833) 467-4091 to schedule one.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Irvine
Yes, in most Irvine villages you’ll need architectural review approval before any visible change to your kitchen. We pull that approval as part of our scope so the job doesn’t stall mid-demo. Call (833) 467-4091 and we’ll walk you through the process for your specific village.
That’s thermofoil failure from heat and moisture exposure. The foil delaminates from the MDF core, usually near the dishwasher or a south- or west-facing window where reflected heat builds up. We can reskin or replace the affected doors and match the surviving fronts.
It depends on the boxes. If the particleboard is sound and the frames are square, quartz goes on fine. If the sink base or dishwasher opening has swelled, we’ll replace that section with a plywood box before the top goes on. We specify the product before we quote the price, so you’ll know before demo starts.
Tract kitchens in Irvine are tight, with fixed window and plumbing locations set by the original build. You can move some elements, but the footprint has limits. We work within those constraints and tell you what’s realistic before you spend money on drawings. Call (833) 467-4091 for an exact quote on your layout.
Cabinet installation runs $4,000 – $13,000, countertops $2,000 – $6,500, and a small kitchen remodel $9,000 – $20,000. Full kitchen remodels run $14,000 – $45,000 depending on scope and materials. Call (833) 467-4091 for a line-item estimate on your specific job.
Service Areas Near Irvine
We serve Irvine and the surrounding cities from our base in Tustin. Our Irvine service area covers the villages of Woodbridge, Northwood, Westpark, and the Great Park neighborhoods, plus the ZIP codes 92606, 92612, 92614, and 92616. We also run calls into CGI service in Garden Grove and CGI service in Fountain Valley.
Book Your CGI Service in Irvine Today
If your CGI cabinets are peeling, swelling, or sagging, call (833) 467-4091 to schedule a free estimate. We’ll inspect the run, tell you what’s salvageable, and get approval in motion. CGI sales & service are independent, never manufacturer-authorized.
Written by Noel Quintero, Owner at Ashbury Contractors, serving Irvine and surrounding cities.